The Engineers Community
To connect all PCs in a network, plug them into the same router/switch via Ethernet cables or connect them to the same Wi-Fi network.then enable “Network Discovery” and “File and Printer Sharing” in Windows Control Panel (Network and Sharing Center > Advanced sharing settings) to allow devices to see each other. Step-by-Step Instructions:
Configuring NAS storage in Windows Server 2022 involves initializing new disks in Disk Management, creating storage pools/volumes for data, and sharing them via File Explorer or Server Manager.Essential steps include setting a static IP, creating a volume using NTFS/ReFS, and configuring SMB permissions to make data accessible to the network. Step-by-Step Configuration Guide Create or modify…
A network switch is a hardware device that connects multiple devices (computers, printers, servers) within a Local Area Network (LAN) using Ethernet cables. It operates at Layer 2 (Data Link Layer) of the OSI model, intelligently forwarding data packets only to the intended destination device using MAC addresses, which increases network efficiency and speed. How a…
A Layer 2 (L2) switch is a high-speed networking device operating at the Data Link layer (Layer 2) of the OSI model, primarily used to connect devices within a local area network (LAN). It forwards data frames based on destination MAC addresses, using a MAC address table to direct traffic specifically to the intended port, reducing…
A Layer 3 (L3) switch is a high-performance networking device that combines the functions of a switch and a router, operating at both the Data Link (Layer 2) and Network (Layer 3) layers of the OSI model. Unlike traditional routers, L3 switches use specialized hardware (ASICs) to route data packets between subnets or VLANs at speeds…
Connecting two different IP networks/subnets with a router involves configuring unique IP addresses on different router interfaces, enabling routing between them, and ensuring devices on each network use the router as their default gateway. teps to Connect Different IP Networks: Configure Router Interfaces: Assign a static IP address from the first network (e.g., ) to LAN Port 1…
Aruba access point configuration typically involves connecting the AP to a PoE switch, identifying its DHCP-assigned IP, logging into the web interface (default: admin/serial number), setting a new password, and configuring SSIDs via the Instant UI or Aruba Central. Initial setup requires setting the country code and updating firmware. Initial Setup Steps Configuration Methods This video…
Configuring a Fortinet AP231G without a physical controller (FortiGate) can be achieved by using the FortiLAN Cloud platform, which allows for standalone management. The AP connects to the internet and downloads its configuration from the cloud. Prerequisites Step-by-Step Configuration (FortiLAN Cloud) Alternative: Local Standalone Configuration If you do not want to use the cloud, you can configure it…
Microsoft Intune is a cloud-based unified endpoint management service that secures and manages mobile devices, desktop computers, and applications As part of the Microsoft 365 suite, it enables IT to control data access on both corporate and Bring Your Own Device (BYOD) setups. It is used for enforcing security policies, managing app deployment, and facilitating remote work,…
Configuring a Cisco trunk port enables a single physical interface to carry traffic for multiple VLANs between switches using 802.1Q encapsulation. Essential commands involve entering interface configuration mode, setting encapsulation to dot1q (if needed), and changing the port mode to trunk. Basic Trunk Configuration Commands text Switch# configure terminalSwitch(config)# interfaceSwitch(config-if)# switchport trunk encapsulation dot1q // Required…
